Datasheet

Thirdline：the third line number displayed, signed char variable Shows the number of cells stored.
when ShowState=0x03；
Firstline
：
the first line number displayed, signed int variable display the temperature value (or, display time under MAX/MIN mode).
10 times the value of the temperature
（if the data transferred back is 100, therefore, the temperature is 10.0）
Secondline： the second line number displayed, float variable the area set by pitot tube, when it’s set into a rectangle, it’s the length of W.
Thirdline： the third line number displayed, signed char variable Shows the number of cells stored.
when ShowState=0x03；
Firstline
：
the first line number displayed, signed int variable display the temperature value (or, display time under MAX/MIN mode).
10 times the value of the temperature
（if the data transferred back is 100, therefore, the temperature is 10.0）
Secondline： the second line number displayed, float variable Flow values
Thirdline： the third line number displayed, signed char variable Shows the number of cells stored.
At MAX/MIN mode
Firstline ：display the first line data, display time, the front byte is hour/minute, the following byte is minute/second. ie bytes[1], bytes[2] mentioned above.