User manual

Voltsoft User Manual Version 2.0
70
6.6.4 DL111K – Settings
1 Time Configure the device data time value.
The user can specify a defined time or use the system
date time.
2 Logger Name Input the unique alias for that device.
3 Record Start Condition By Button – The data logger will start recording only
after the user pressed the red button on
the device.
After Setup – The data logger will start recording
immediately after setup.
4 Delay Time Only available if “After Setup” selected.
Specify the delay time for recording start after setup.
5 Sample Rate Instruct the logger to log readings at a specific rate.
7 LED Flash Cycle Configure the LED flash cycle - the longer the time, the
longer the battery life.
8 Unit Select temperature unit (Celsius or Fahrenheit)
9 Temperature Low / High
Alarm
Configure the temperature low / high alarm level.
10 Default Button Reload the factory default settings.
11 Setup Button Save changes.
12 Close Button Close this interface.