User manual

Voltsoft User Manual Version 2.0
55
6.4.4 DL161S – Settings
1 Time Configure the device data time value.
User can specify a defined time or use the system date
time.
2 Logger Name Input the unique alias for that device.
3 Sound Unit The sound unit can be dBA or dBC.
4 Measuring speed The measuring speed can be Fast or Slow.
5 Record Start Condition By Button – The data logger will start recording only
after the user pressed the red button on
the device.
After Setup – The data logger will start recording
immediately after setup.
6 Sample Rate Instruct the data logger to log readings at a specific
rate.
7 Sample Points Configure the data logger sample points.
8 Infinite For real time mode only, the download will not stop
until the user stopped the download.
9 Recording Time Calculate the recording time based on the selected
sample points and sample rate.
10 LED Flash Cycle Configure the LED flash cycle - the longer the time, the
longer the battery life.
11 Logger Mode Manual – The data logger will start recording only
after the user presses the red button on
the device.
Instant – The data logger will start recording
immediately after setup.
12 Storage Setup Storage can be Store or Real Time.
Store – The data will be stored in offline mode.