User manual

Viewing waveforms in the X-Y mode

Background The X-Y mode compares the voltage of Channel 1 and Channel 2 waveforms in a

single display. This mode is useful for observing the phase relationship between

the two waveforms.

Procedure

1. Connect the signals to Channel 1 (X-axis)

and Channel 2 (Y-axis).

2. Make sure both Channel 1 and 2 are

activated.

CH1 CH2

3. Press the Horizontal key.

4. Press XY. The display shows two

waveforms in X-Y format; Channel 1 as

X-axis, Channel 2 as Y-axis.

Adjusting the

X-Y mode

waveform

Horizontal position CH1 Position knob

Horizontal scale CH1 Volts/Div knob

Vertical position CH2 Position knob

Vertical scale CH2 Volts/Div knob

Example