User manual

74
4. Press Go-NoGo. The test starts and
stops according to the conditions set on
page 68, 69. To stop the test that has
already started, press Go-NoGo again.
Go - NOGO
Menu
5. The test results appear in the Ratio soft-
key. The numerator denotes the total
number of failed tests. The denominator
denotes the total number of tests.
Ratio:
2 BMP
9 BMP
Numerator: Number of “failed“ tests.
Denominator: Total number of tests.
Data Logging
Overview
Background The Data logging function allows you to log data or a screen image
over timed intervals for up to 100 hours to a USB ash drive.
The data or images are stored to a USB ash drive in a directory
named LogXXXX. LogXXXX is incremented each time the data
logging function is used.
The les saved in the LogXXXX directory are named DSXXXX.
CSV, or DSXXXX.BMP for data or image les, respectively. At each
timed interval data or an image le is saved and the le number
incremented. For example, DS0000 is the rst logged data, DS0001
is the second and so on.