User manual

62
M1:dB Position of the left cursor in dB.
M2:dB Position of the right cursor in dB.
Δ: dB The dB difference between M1 and M2.
Div: The frequency per division.
Moving the
horizontal
cursors
To move the left cursor, press X1 and then use
the Variable knob.
X1
-5.000uS
0.000uV
To move the right cursor, press X2 and then
use the Variable knob.
X2
5.000uS
0.000uV
To move both cursors at once, press X1X2
and then use the Variable knob.
Remove cursors Press Cursor to remove the onscreen cursors.
Cursor
Using the vertical cursors
Procedure 1. Press the Cursor key.
Cursor
2. Press X↔Y to select the vertical (Y1&Y2)
cursor.
3. Press Source repeatedly to select the
source channel.
Range CH1, 2, MATH
Source
CH1
4. The cursor measurement results will appear in the menu.
Parameters
Y1 Voltage level of the upper cursor
Y2 Voltage level of the lower cursor