User manual

61
Cursor Measurements
Cursor lines, horizontal or vertical, show the precise position of the input waveforms or the math
operation results. The horizontal cursors can track time, voltage/current* and frequency, whilst the
vertical cursors can track voltage/current*. All measurements are updated in real-time. *probe type
dependant (page 94).
Using the horizontal cursors
Procedure 1. Press the Cursor key. The cursors appear in
the display.
Cursor
2. Press X↔Y to select the horizontal (X1&X2)
cursor.
3. Press Source repeatedly to select the source
channel.
Range CH1, 2, MATH
Source 1
CH1
4. The cursor measurement results will appear in the menu, F2 to F4.
Parameters X1 Time position of the left cursor. (relative to zero)
X2 Time position of the right cursor. (relative to zero)
X1X2 The difference between the X1 and X2.
Δ: us The time difference between X1 and X2.
f: Hz The time difference converted to frequency.
V/A The voltage/current difference from X1 and X2.