User manual
57
FRF
Time between:
Source 1 rst rising edge and
Source 2 rst falling edge
FFR
Time between:
Source 1 rst falling edge and
Source 2 rst rising edge
FFF
Time between:
Source 1 rst falling edge and
Source 2 rst falling edge
LRR
Time between:
Source 1 rst rising edge and
Source 2 last rising edge
LRF
Time between:
Source 1 rst rising edge and
Source 2 last falling edge
LFR
Time between:
Source 1 rst falling edge and
Source 2 last rising edge
LFF
Time between:
Source 1 rst falling edge and
Source 2 last falling edge
Automatic measurement gating
Background Automatic measurements can be restricted to a specic area (gating). When
cursors are turned on, the area between the cursors is used for automatic
measurements. When cursors are turned off, measurements are derived from all
the points that are displayed on screen.
Turn gating on
1. Turn on cursors to enable gated automatic
measurements.
page 61