Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsLaboratory Test EquipmentDigital 150 MHz 2-channel 1 null 1 null 8 Bit Digital storage (DSO)
51525354555657585960
49
Procedure 1. Connect the input signal to the oscilloscope and press
the Autoset key.
Autoset
2. The waveform(s) appears in the center of the display.
Before Autoset After Autoset
Undo option
Undoing the
Autoset
To undo the Autoset, press Undo (available
for a few seconds).
Undo
Adjusting the
trigger level
If the waveform is still unstable, try
adjusting the trigger level up or down by
using the Trigger Level knob.
LEVEL
Change Modes To change the type of mode, press Type
(available for a few seconds). The Type
icon will change to next type.
Type Fit Screen, AC Priority
The next time the Autoset key is pressed,
the new mode will be activated.
Type
AC Priority