Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsLaboratory Test EquipmentDigital 150 MHz 2-channel 1 null 1 null 8 Bit Digital storage (DSO)
21222324252627282930
22
6. Connect the probe between the Channel1 input terminal and probe
compensation signal output (2Vp-p, 1kHz square wave).
7. Set the probe attenuation to x10.
8. Press the Autoset key. A square
waveform will appear in the center of
the display. For details on Autoset, see
page 48.
Autoset
9. Press the Display key, then Type and
select the vector waveform type.
Display
Type
Vectore
10. Turn the adjustment point on the probe to atten the square waveform edge.