User manual
128
3. Press Recall Waveform. The
display shows the available source
and destination options.
Recall
Waveform
4. Press Source repeatedly toselect
the le source, internal memory
or USB. Use the Variable knob to
change the memory location (W1
~ W15)/DSXXXX.CSV.
Source
Memory
VARIABLE
Memory Internal memory, W1 ~ W15
USB USB ash drive, DSXXXX.CSV. The waveform le(s)
must be placed in the root directory to be loaded.
5. Press Destination. Use the
Variable knob to select the
memory location.
Destination
VARIABLE
Ref A, B Internally stored reference waveforms A, B
6. Press Recall to conrm recalling.
When completed, a message
appears at the bottom of the
display.
Recall
Note
The le will not be recalled if the power is turned off or the
USB ash drive is removed before completion.