User manual

126
Recalling a reference waveform to the display
Procedure 1. The reference waveform must be stored in advance. See page 119 for details.
2. Press the Save/Recall key.
Save/Recall
3. Press Display Refs. The reference
waveform display menu appears.
Display
Refs.
4. Select the reference waveform,
Ref A or Ref B, and press it. The
waveform appears on the display
and the period and amplitude
of the waveform appears in the
menu.
Ref. A Off
↓
Ref. A On
200mV
250uS
5. To clear the waveform from the
display, press Ref A / B again.
Ref. A Off
Recalling panel settings
Procedure 1. (For recalling to USB) Insert the
USB ash drive into the front
panel USB port.
2. Press the Save/Recall key.
Save/Recal