User manual

125
Recalling the default panel settings
Procedure 1. Press the Save/Recall key.
Save/Recal
2. Press Default Setup. The factory
installed setting will be recalled.
Default
Setup
Setting contents The following is the default panel setting contents.
Acquisition Mode: Normal
Channel Coupling: DC
BW limit: Off
Invert: Off
voltage: x1
Cursor Source: CH1
Vertical: None
Horizontal: None
Display Type: Vectors
Graticule:
Accumulate: Off
Horizontal Scale: 2.5us/Div
H Pos Adj: Fine
Mode: Main Timebase
Hor Pos: 0
Math Type: + (Add)
Position: 0.00 Div
Channel: CH1+CH2
Unit/Div: 2V
Measure Item: Vpp, Vavg, Frequency, Duty cycle, Rise Time
Trigger Type: Edge Source: Channel1
Mode: Auto Slope:
Coupling: DC
Noise Rejection: Off
Rejection: Off
Utility SaveImage, InkSaver On, Probe squarewave 1kHz 50% duty.