User manual

122
Saving all (panel settings, display image, waveform)
Procedure 1. (For saving to USB ash drive) Insert
the USB ash drive into the front
panel USB port.
2. Press the Save/Recall key twice to
access the Save menu.
Save/Recall Save/Recall
3. Press Save All. The following
information will be saved.
Save
All
Setup le
(Axxxx.set)
Two types of setups are saved: the current panel setting
and the last internally saved settings (one of S1 ~ S15).
Display image
(Axxxx.bmp)
The current display image in bitmap format.
Waveform data
(Axxxx.csv)
Two types of waveform data are saved: the currently
active channel data and the last internally saved data
(one of W1 ~ W15).
4. Press Ink Saver repeatedly to invert
the background color (on) or not (off)
for the display image.
Ink Saver
Off
5. Press Destination.
Destination
USB
1M
USB
Normal
Save to the USB ash drive with a 4k waveform memory
length.