Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsLaboratory Test EquipmentDigital 150 MHz 2-channel 1 null 1 null 8 Bit Digital storage (DSO)
111112113114115116117118119120
118
Saving the panel settings
Procedure 1. (For saving to USB ash drive) Insert
the USB ash drive into the front panel
USB port.
2. Press the Save/Recall key twice to
access the Save menu.
Save/Recall Save/Recall
3. Press Save Setup.
Save
Setup
4. Press Destination repeatedly to select
the saved location. Use the Variable
knob to change the internal memory
location (S1 ~ S15).
Destination
Memory
VARIABLE
Memory Internal memory, S1 ~ S15
USB USB, no practical limitation for the amount of le.
When saved, the setup le will be placed in the root directory.
5. Press Save to conrm saving. When
completed, a message appears at the
bottom of the display.
Save
Note
The le will not be saved if the power is turned off or the USB
ash drive is removed before completion.