User manual

104

Rear Panel USB Port Interface

The USB slave port on the rear panel can be set to auto detect, however occasionally the USB

host type cannot be detected. The USB Port function allows the USB host type to be manually or

automatically set for the rear panel.

USB connection PC / Printer end Type A, host

VDO-2000A end Type B, slave

Speed 1.1/2.0 (full speed)

Procedure

1. Connect the USB cable to the USB slave port on

the VDO-2000A.

2. Insert the other end of the USB cable into the PC

or Printer USB port.

3. Press the Utility key.

Utility

4. Press More twice.

5. Press USB Port repeatedly to set the host device.

Range Printer, PC, Auto Detect

USB Port

Auto Detect