User manual

102
4. Press Mode repeatedly to select the trigger mode,
Auto or Normal. To select the Single trigger mode,
press the Single key.
Range Auto, Normal
Mode
Auto
SINGLE
5. Press When repeatedly to select the pulse
condition. Then use the Variable knob to set the
pulse width.
Condition > , < , = , ≠
Width 20ns ~ 10s
When <
20.0ns
VARIABLE
6. Press Slope/Coupling to set trigger slope and
coupling.
Slope /
Coupling
7. Press Slope repeatedly to select the trigger slope,
which also appears at the bottom of the display.
Range Rising edge, falling edge
Slope
8. Press Coupling repeatedly to select the trigger
coupling.
Range DC, AC
Coupling
AC
9. Press Rejection to select the frequency rejection
mode.
Range LF, HF, Off
Rejection
Off