User manual

99
Pressing Set to Minimum sets the Holdoff time to
the minimum, 40ns.
Holdoff
40.0ns
Note: The holdoff function is automatically disabled when the waveform update mode
is in Roll mode.
Conguring the edge trigger
Procedure 1. Press the Trigger menu key.
MENU
2. Press Type repeatedly to select edge trigger.
Type
Edge
3. Press Source repeatedly to select the trigger
source.
Range Channel 1, 2, Line, Ext
Source
CH1
4. Press Mode repeatedly to select the Auto or
Normal trigger mode. To select the single trigger
mode, press the Single key.
Range Auto, Normal
Mode
Auto
SINGLE
5. Press Slope/coupling to enter into the trigger
slope and coupling selection menu.
Slope /
Coupling
6. Press Slope repeatedly to select the trigger slope,
rising or falling edge.
Range Rising edge, falling edge
Slope