User manual

Conguring the pulse width trigger

Procedure 1. Press the Trigger menu key. MENU

2. Press Type repeatedly to select pulse width trigger.

The pulse width trigger indicator appears at the

bottom of the display.

Type

Pulse

3. Press Source repeatedly to select the trigger

source.

Range Channel 1, 2, Ext

Source

CH1

4. Press Mode repeatedly to select the trigger mode,

Auto or Normal. To select the Single trigger mode,

press the Single key.

Range Auto, Normal

Mode

Auto

SINGLE

5. Press When repeatedly to select the pulse

condition. Then use the Variable knob to set the

pulse width.

Condition > , < , = , ≠

Width 20ns ~ 10s

When <

20.0ns

VARIABLE

6. Press Slope/Coupling to set trigger slope and

coupling.

Slope /

Coupling