User manual

To move the right cursor, press X2 and then

use the Variable knob.

22.9us

0.000V

To move both cursors at once, press X1X2

and then use the Variable knob.

X1X2

23.6us

11.9Hz

212.0mV

Remove cursors Press Cursor to remove the onscreen

cursors.

Cursor

Using the vertical cursors

Procedure 1. Press the Cursor key.

Cursor

2. Press X↔Y to select the vertical (Y1&Y2)

cursor.

X ↔ Y

3. Press Source repeatedly to select the

source channel.

Range CH1, 2, MATH

Source

CH1

4. The cursor measurement results will appear in the menu.

Parameters

Y1 Voltage level of the upper cursor

Y2 Voltage level of the lower cursor

Y1Y2 The difference between the upper and lower cursor

Moving the

vertical cursors

To move the upper cursor, press Y1 and then

use the Variable knob.

123.4mV

To move the lower cursor, press Y2 and then

use the Variable knob.

12.9mV