User manual

55
Cursor Measurements
Cursor line, horizontal or vertical, shows the precise position of the input waveforms or the math
operation results. The horizontal cursor can track time, voltage and frequency, whilst the vertical
cursor can track voltage.
Using the horizontal cursors
Procedure 1. Press the Cursor key. The cursors appear in
the display.
Cursor
2. Press X↔Y to select the horizontal (X1&X2)
cursor.
X ↔ Y
3. Press Source repeatedly to select the source
channel.
Range CH1, 2, MATH
Source 1
CH1
4. The cursor measurement results will appear in the menu, F2 to F4.
Parameters
X1 Time position of the left cursor. (relative to zero)
X2 Time position of the right cursor. (relative to zero)
X1X2 The difference between the X1 and X2.
-uS The time difference between X1 and X2.
-Hz The time distance converted to frequency.
-V The voltage difference. (X1-X2)
Moving the
horizontal
cursors
To move the left cursor, press X1 and then use
the Variable knob.
X1
123.4us
212.0mV