User manual

50
Using the probe compensation signal
Background This section introduces how to use
the probe compensation signal for
general usage, in case the DUT
signal is not available or to get a
second signal for comparison. For
probe compensation details, see
page 117.
Note: The frequency accuracy and duty factor are not guaranteed. Therefore the
signal should not be used for reference purposes.
Waveform type
Square waveform used for probe compensa-
tion. 1k ~ 100kHz, 5% ~ 95%.
Demonstration signal for showing the effects
of peak detection. See page 72 for peak
detection mode details.
View the probe
compensation
1. Connect the probe between the compensation signal output and Channel
input.
2. Press the Utility key. Utility
3. Press ProbeComp.
ProbeComp
Menu