User manual

49
Selecting the
horizontal
scale
To select the timebase (scale), turn the TIME/DIV
knob; left (slow) or right (fast).
TIME/DIV
Range 1ns/Div ~ 10s/Div, 1-2.5-5 increment
Horizontal scale: 50us/div Horizontal scale: 250us/div
Changing the vertical position and scale
Set vertical
position
To move the waveform up or down, turn the vertical
position knob for each channel.
As the waveform moves, the vertical position of the cursor appears at the bottom
left corner of the display.
Run/Stop mode The waveform can be moved vertically in
both Run and Stop mode.
Select vertical
scale
To change the vertical scale, turn
the VOLTS/DIV knob; left (down)
or right (up).
VOLTS/DIV
Range 2mV/Div ~ 10V/Div, 1-2-5 increments
The vertical scale indicator for each channel on the bottom left of the display
changes accordingly.