User manual

43
Default Settings
Here are the factory installed panel settings which appear
when pressing the Save/Recall key — Default Setup.
Save/Recall
Default
Setup
Acquisition Mode: Normal
Channel Scale: 2V/Div Invert: Off
Coupling: DC Probe attenuation voltage: x1
BW limit: Off Channel 1 & 2: On
Cursor Source: CH1 Cursor: Off
Display Type: Vectors Accumulate: Off
Grid: Full
Horizontal Scale: 2.5us/Div Mode: Main Timebase
Math Type: + (Add) Position: 0.00 Div
Measure Item: Vpp, Vavg, Frequency, Duty Cycle, Rise Time
Trigger Type: Edge Source: Channel1
Mode: Auto
Slope:
Coupling: DC Rejection: Off
Noise Rejection: Off
Utility Hardcopy: SaveImage, InkSaver Off ProbeComp: Square wave,
1k, 50% duty cycle
Go-NoGo Go-NoGo: Off
When:
Source: CH1
Violating: Stop
Data Logging Data logging: Off
Setup: Waveform
Duration: 5 mins
Source: CH1
Interval: 2 secs