User manual

112
Recalling a reference waveform to the display
Procedure The reference waveform must be stored in advance. See page 105 for details.
1. Press the Save/Recall key.
Save/Recall
2. Press Display Refs. The reference
waveform display menu appears.
Display
Refs.
3. Select the reference waveform,
Ref A or Ref B, and press it. The
waveform appears on the display
and the period and amplitude
of the waveform appears in the
menu.
Ref.A Off
↓
Ref.A On
1V
2.5ms
4. To clear the waveform from the
display, press Ref A / B again.
Ref.A Off
Recalling panel settings
Procedure 1. (For recalling to USB) Insert the
USB ash drive into the front
panel USB port.
2. Press the Save/Recall key.
Save/Recall