User manual

108
Saving all (panel settings, display image, waveform)
Procedure 1. (For saving to USB ash drive) Insert
the USB ash drive into the front
panel USB port.
2. Press the Save/Recall key twice to
access the Save menu.
Save/Recall Save/Recall
3. Press Save All. The following
information will be saved.
Save
All
Setup le
(Axxxx.set)
Two types of setups are saved: the current panel setting and
the last internally saved settings (one of S1 ~ S15).
Display image
(Axxxx.bmp)
The current display image in bitmap format.
Waveform data
(Axxxx.csv)
Two types of waveform data are saved: the currently active
channel data and the last internally saved data (one of W1
~ W15).
4. Press Ink Saver repeatedly to invert
the background color (on) or not (off)
for the display image.
Ink Saver
Off
5. Press Destination.
Destination
USB
USB Save to the USB ash drive with a 4k waveform memory
length.