User manual
81
26. TECHNICAL DATA
Display .................................Max. 60000 counts (characters)
Measuring rate .....................
approx. 2 – 3 measurements/second,
Bargraph: approx. 2 – 3 measurements/second
Measuring line length ..........approx. 90 cm each
Measuring impedance .........>10 MΩ (V range)
Operating voltage ................9 V block battery
Working conditions ..............0 to +30 ºC (<75 % RH), +30 to +40 ºC (<50 % RH)
Operating altitude ................max. 2000 m
Storage temperature ............-10 to +50 ºC
Weight .................................approx. 380 g
Dimensions (L x W x H) .......185 x 91 x 43 mm
Over-voltage category .........CAT III 1000 V, CAT IV 600 V, contamination degree 2
Measurement tolerances
Statement of accuracy in ± (% of reading + display error in counts (= number of smallest points)). The
accuracy is valid for one year at a temperature of +23 °C (± 5 °C), and at a relative humidity of less
than 75 %, non-condensing. Temperature coefcient: +0.1 x (specied accuracy)/1 °C
Direct voltage
Range Accuracy Resolution
600 mV ±(0,03 % + 10 digits) 0.01 mV
6 V
±(0,05 % + 10 digits)
0.0001 V
60 V 0.001 V
600 V 0.01 V
1000 V 0.1 V
Overload protection: 1000 V; Impedance: 10 MΩ