User manual
55
8. DISPLAY INDICATIONS AND SYMBOLS
The symbols and indications vary depending on the model. This is a list of all possible symbols and
indications in the VC890 series.
Delta symbol for relative measurement (= reference measurement)
AUTO Stands for “automatic measuring range selection”
TrueRMS True RMS measurement
Data hold function
Comparison mode
> <
Limiting value specication, measurement must remain between two specied
values
< >
Limiting value specication, measurement must remain outside of two specied
values
Stands for “comparison test not passed”
Stands for “comparison test passed”
View saved data
OL Overload = the measuring range has been exceeded
OFF Switch position “OFF”
Symbol for battery replacement (battery charge low)
Symbol for the diode test
Symbol for the acoustic continuity tester
AC Alternating voltage or current
Maximum measurement
Minimum measurement
Average measurement
Automatic power off activated
Data memory will be deleted
Manual data memory
Automatic data memory
Symbol for data transfer (active interface)
Function switch activated (blue button labelling)
VOID Data memory contains no values
DC Direct voltage or current
mV Millivolt (=0.001 V)