Information

0 0 1 1 log_VOID_flag Loz_flag Hv_Warning_flag Auto_power_flag
log_VOID_flag:
This bit becomes 1 ,OLED show “VOID” symbol.
Loz_flag
This bit becomes 1 if the function is LOZ
Warning_flag:
This bit represents the super high voltage measurement warning. This bit becomes 1 if super high voltage measurement
is active.
Auto_power_flag:
This bite represents the auto power off status of the DMM.
Msg[60]
0 0 1 1 log_H_flag Comp_flag Pass_flag Inner_flag
log_H_flag:
This bit represents single log data status of the memory
Comp_flag:
This bit represents that the comparison mode is on or not, 1 indicate that the comparison mode is on otherwise 0.
Inner_flag:
Comparison mode selection: 1: Inner 0: Outer
Pass_flag:
Comparison mode result: 0: No Good 1: Pass
Msg[61]
0 0 1 1 Shift_flag Clr_flag Bar_pol_flag log_A_flag
Shift_flag:
This bit represents the status of the shift function. 1: shift is active otherwise 0.
Clr_flag ：
This bit represents the status of the clear memory function. 1: memory clear otherwise 0.
Bar_pol_flag:
This bit represents the overload status of the Simulate strip number.
log_A_flag
This bit represents the continuous memory function is on or not.
Msg[62]
0 0 1 1 bat_grade3_flag bat_grade2_flag bat_grade1_flag bat_grade0_flag
Msg[62].bytes = 0x30,the battery quantum show 0 gear.
Msg[62] .bytes = 0x31,the battery quantum show 1 gear.
Msg[62] .bytes = 0x32,the battery quantum show 2 gear.
Msg[62] .bytes = 0x33,the battery quantum show 3 gear.
Msg[63]
0 0 1 1 0 Memory_Overwrite_flag misplug_warning_flag2 misplug_warning_flag1
Msg[63].bytes&0x34 = 0x30; misplug NO EEROR
Msg[63].bytes&0x34 = 0x31;misplug EEROR ON mA INPUT