User manual

50
Troubleshooting
In purchasing the DMM, you have acquired a product which has been designed to the state of the
art and is operationally reliable.
Nevertheless, problems or errors may occur.
For this reason, the following is a description of how you can eliminate possible malfunctions
yourself.
Always follow the safety instructions!
Error Possible cause Remedy
The multimeter does not Is the battery dead? Check the status.
work. Replace the battery
No measuring value change. Is a wrong measuring function Check the display (AC/DC)
activated (AC/DC)? and switch the function if
applicable.
Are the measuring lines Check the proper fit of the
inserted tightly into the measuring lines.
measuring jacks?
Is the fuse defect? Check the fuses.
Is the HOLD function activated? Press the button “H” to
(display “H”). deactivate this function.
The meter beeps and Wrongly connected Connect measuring lines
the “WARNING!” symbol measuring cables properly to the meter or
flashes change the measuring function.
Repairs other than those described above may only be carried out by an authorised
specialist.
Proceed to page 29 where you will find the section with the Full Service
Hotline.