User manual

c) Use the button “Mode” (g. 3, item 5) at the charger to select the matching charging programme (modes 1 to 8).

For this, push the button “Mode” repeatedly until the desired condition is reached.

d) If the rechargeable battery is connected in the proper polarity, not defective (high-ohmic/interrupted) and the

mains supply is ensured, charging will start after a few seconds. Depending on the charge condition of the con-

nected rechargeable battery and its condition (e.g. rechargeable battery old or new, rechargeable battery at,

etc.), the LEDs will ash or be lit and indicate charging progress (see following chapter 8. LED Displays when

Charging).

Charging takes different amounts of time. For a large rechargeable battery with a capacity of, e.g., 120 Ah,

charging may take more than one day depending on the condition of the rechargeable battery (rechargeable

battery is old or new, rechargeable battery is at or deep-discharged, etc.)

e) End charging when LED 7 “Battery full” (see g. 4) remains lit. For this, remove the rechargeable battery from

the charger and then pull the mains plug out of the mains socket.