Datasheet

ManualsBrandsVOLTCRAFT ManualsTest & MeasurementHandheld multimeter digital VC-11 CAT III 250 V Display (counts): 2000

TECHNICAL DATA

Display 2000 counts

Measuring frequency 2.5 measurements per sec.

Input resistance >1 MΩ

Operating Voltage 3 V/DC (2 x LR 44 or identical)

Ambient conditions Operation 0°C to 40°C, max. 80 % rel. air humidity (non-condensing)

Dimensions (LxWxH) 103 x 52 x 27 (mm)

Weight ca. 80 g

Measurement tolerances

Type of operation Measuring range Accuracy

Direct voltage 200 mV ±(1.5% + 2 counts)

2000 mV - 250 V ±(2.5% + 2 counts)

Alternating voltage

50 Hz 200 - 250 V ±(2.5% + 9 counts)

Direct current 2000 μA - 200 mA ±(2.5% + 9 counts)

Resistance 200 Ω - 2000 kΩ ±(2.5% + 5 Counts + 3 Ohm)

Max. input sizes / overload protection

Voltage measurement 250 V/DC or V/AC rms (rms = effective)

Current measurement max. 200 mA DC, max. 250 V/DC

Overload protection Fine fuse 5 x 20 mm (F500mA/250V)

Quick-acting 500 mA, 250 V. May only be exchanged by an expert.

PACKAGE CONTENT

Digital multimeter // 2 x LR44 // Operating instructions

This data sheet is published by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing

systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This data sheet represents the technical status at the

time of printing.