Instructions

51
Mode 11
Feature Thedataareloggedimmediatelyandinaninniteloop.
Theloggingwillstopassoonasthebatteryisemptyorthecongurationisreplacedby
another“Loggingstartcondition”.
Setting • As“Loggingstartcondition”,select:“Continuouslogging”
Mode 12
Feature Thedataareloggedimmediatelyandinaninniteloop.
Foranadditionalstopmode,select:Theloggingwillstopifyoupressandholddownthe
“ENTER” button (8) for a few seconds.
Setting • As“Loggingstartcondition”,select:“Continuouslogging”
• As“Loggingendcondition”,select:“Stopbutton”
Mode 13
Feature Thedataareloggedimmediatelyandinaninniteloop.
Foranadditionalstopmode,select:LoggingstopsafterPDFreportisgenerated.
Setting • As“Loggingstartcondition”,select:“Continuouslogging”
• As“Loggingendcondition”,select:“AfterPDFcreation”
 Formodes1through13,youcanuseadditionalfunctionsforthedelayoftheloggingstarttime.When
conguring,enteravalueunder“Startdelayinminutes”.