Instructions

48
f) Creating/saving the conguration le
• Aftercompletingthecongurationsettings,select“Createconguration”tosavethecongurationleonyour
computer.
• Anewwindowappearstochangethecongurationlename.Defaultnameis“SetLog”.Ifneeded,changethe
nameofthele.
• Conrmthelenamebyclicking“Createconguration”.Yourcongurationlewillbesavedonyourcomputerin
the downloads folder.
g) Transferring the conguration le to the data logger
• Remove the USB protective cap from the data logger.
• Connect the data logger to your computer and wait until it has been recognised as a removable disc.
• Draganddropthecongurationlefromthedownloadfolderofyourcomputertothedataloggerfoldertoexecute
theconguration.
• ThegreenLEDindicatorlight(3)willashtwiceifthecongurationlehasbeensuccessfullyinstalledonthe
data logger.
• Whenthedataloggeriscongured,disconnectthedataloggerfromyourcomputer.
h) Checking the conguration settings
• Startmodeisbasedonthecongurationsetting“Recordstartcondition”.
• Tocheckwhichstartmodeisenabled,loadtheexistingcongurationleintothewebinterface,checkthePDF
report or call up the function menu of the data logger.
• Stopmodeisbasedontheconguration“Loggingendcondition”.
• Tocheckwhichstopmodeisenabled,loadtheexistingcongurationleintothewebinterfaceorcallupthefunc-
tion menu of the data logger.
• Forfurtherinstructionsoncallingupthefunctionmenu,refertochapter“14b)Callingupthefunctionmenu”.