Instructions

39
7. Display elements and symbols
Thefollowingsymbolsandinformationareshownonthedisplay(5).Belowyouwillndthelistofsymbolsandtheir
meaning.
Icon Meaning
Statusindicator:Measuredvaluesarewithinthelimitsdenedduringconguration.
No high/low alarm is set.
Alarmindicator:Measuredvaluesareexceedingthelimitsdenedduringcongura-
tion.
Recording has been stopped.
Recording video.
Recording has been paused.
P
Deviceisreadytorecord:Deviceiscongured,andrecordinghasnotstartedyet.It
will disappear when the data logger records.
Batterysymbol:Fullbatterycapacity
Batterysymbol:Sufcientbatterycapacity
Batterysymbol:Lowbatterycapacity,replacethebattery
Lux
SI unit of illuminance
Fc
Imperial unit of illuminance (foot candle)
x10
Multiplier x10
ID
Logger ID
MAX
Largest measured value
MIN
Smallest measured value
USB
Connected to computer.
USB PDF
Connected to computer and generating PDF report.
PAUSE
Indicates that the pause function is enabled for the alarm limit.
MODE START
Indicates that a start mode has been chosen. It will be shown before recording starts.
MODE STOP
Indicates that a stop mode has been chosen. It will be shown before recording ends.
TIME START
Indicates remaining time before start of recording.
TIME STOP
Indicates remaining time until end of recording.