Instructions

13
Programme settings
In the programme menu, you can pre-set all parameters for rechargeable battery care. To enter the programme
menu, briey press (for less than 1 second) the knob. The programme menu will be displayed with a beep (unless
the beep has been disabled in the system menu).
The “Programme” menu contains the following settings.
The values without brackets are pre-set, and the values in brackets describe the possible adjustment range.
Menu item Meaning Value
Battery Set the rechargeable battery type. LiPo
(LiPo, LiFe, Li-ion, LiHV, NiMH, NiCd,
Pb)
Cells Set the number of rechargeable battery cells
(S = cells).
LiPo 6S (1 - 6S)
LiFe 6S (1 - 6S)
LiIo 6S (1 - 6S)
LiHv 6S (1 - 6S)
NiMH Auto
NiCd Auto
Pb 6S (1 - 12S)
Mode Set the charging/discharge programme. Charge
(Charge
Discharge
Storage
Ext DISC)
Current Set the max. charge / discharge current. 2.0 A
(0.1-16.0 A in 0.1 A increments,
depending on the mode)
TVC Set the end-of-charge voltage per cell. LiPo 4.20 V (4.18 - 4.24 V)
LiFe 3.60 V (3.58 - 3.65 V)
LiIo 4.10 V (4.08 - 4.20 V)
LiHv 4.35 V (4.25 - 4.35 V)
NiMH 1.80 V
NiCd 1.80 V
Pb 2.40 (2.30 - 2.40 V)
Start Start the selected programme.
Back Ends the programme setup and returns to
the main display.
Follow the menu selection. Start with the rst menu item and then select all other menu items.