Instructions

5.19.4 [Language►]

To set the system language, in German by default.

5.19.5 [Date/Time►]

Used to set the device date, time, and their format.

 [Date/Time On Off]

Turn on or off Date/Time display.

 [Format►]

Time format can be displayed as

[Year,Month,Day,Hour,Minute,Second] or

[Hour,Minute,Second,Year,Month,Day].

 [Date Set]

Set the display date for spectrum analyzer. Format is

YYYMMDD. E.g. June 22th,2012 should display as 20120622.

 [Time Set]

Set the display time for spectrum analyzer. Format is HHMMSS.

E.g. 16:55:30 should display as 165530.

5.19.6 [Calibration►]

Pop up user calibration soft menu including [Start Calibration] and

[Restore Factory].

[Calibration]: Set the signal generator frequency as 440MHz,

power as -20dBm, access to RF instrument RF input, press the

[Start Calibration] softkey, start the implementation of user

calibration.

[Factory]: If you do not need the user calibration compensation

data, press the [Restore Factory] key to clear the data and return to

the factory status.

5.19.7 [Service►]

For spectrum analyzer debugging.