Instructions

5.19.3 [PowerOn/Preset►]
Used to set the analyzer power on parameters or reset
parameters.
1. [Power Set►]
Power-on parameter settings include [Factory] and [User].
2. [Preset►]
Power-on parameter settings include [Factory] and [User].
Note: To save the current system configuration as a user-defined
configuration, press the [Save] panel key and select the [User
Status] menu item.
Table 5-2 [Factory] Settings
Parameter
Value
Frequency
Center Frequency
750.009000MHz
Start Frequency
9.000kHz
Stop Frequency
1.500009000GHz
Frequency Step
150.000000MHz
Frequency Offset
0Hz
Frequency
Reference
Internal
SPAN
Sweep
1.500000000GHz
AMPTD
Reference Level
0.00dBm
Attenuator
Auto 9 dB
Scale/div
10.00dB
Scale Type
Log
Reference Offset
0.00dB
Unit
dBm
Preamp
Off
BW
Resolution
Bandwidth
Auto 3MHz
57