Instructions

5.19
【
System
】
A soft menu for system parameter settings pops up. Including
[System Info ►], [Configure I / O ►], [Power On / Reset ►], [Local
Language ►], [Date / Time ►], [User Calibration ►], [System
Service ►]. For first time you use the spectrum analyzer, set the
date and time, the system will store the settings, restart the
machine after power off won’t change the settings.
5.19.1 [System►]
Pop up system information and system log soft menu.
1) [System Information]
2) [System Log]
5.19.2 [Config I/O►]
A soft menu for setting the interface address of the spectrum
analyzer, including [Network ►]. The spectrum analyzer supports
VGA, LAN and USB interface communication.
1. [LAN►]
Pop out the relative menu for network configuring.
1.1 [IP]
Used to set the IP address of the LAN port.
1.2 [Mask]
Set the subnet mask parameter.
1.3 [Gate]
Set default gateway address.
1.4 [Reset Lan]
To reset the LAN.
56