Instructions

frequency of current marker.
 If Delta Marker is selected, the center frequency step will be set
to the frequency at which the Delta Marker is located.
 The function is invalid in Zero span mode.
5.15.3 [Mkr->Start]
Sets the start frequency of the analyzer based on the frequency of
the current marker.
 If Normal is selected, the start frequency will be set to the
frequency of the current marker.
 If Delta Marker is selected, the start frequency will be set to the
frequency at which the Delta Marker is located.
 The function is invalid in Zero span mode.
5.15.4 [Mkr->Stop]
Sets the stop frequency of the analyzer based on the frequency of
the current marker.
 If Normal is selected, the stop frequency will be set to the
frequency of the current marker.
 If Delta Marker is selected, the stop frequency will be set to the
frequency at which the Delta Marker is located.
 The function is invalid in Zero span mode.
5.15.5 [Mkr->Ref Level]
Sets the reference level of the analyzer based on the amplitude of
the current marker.
 If Normal is selected, the reference level will be set to the
amplitude of the current marker.
 If Delta Marker is selected, the reference level will be set to the
amplitude at which the Delta Marker is located.
5.15.6 [MkrΔ->Span]
Changes the span of the analyzer to the frequency difference
49