Instructions

This soft menu is used to track the source network measurement of
the user to adjust the measurement results display location.
4) [Sweep Points]
Used to set the number of scanning points for network
measurements.
5) [Sweep Time]
Used to set the scan time for network measurements.
6) [Normalize]
This soft menu is used to track the user's field calibration of the
source network measurements. After connecting the instrument's
RF output to the RF input, press the "normalized" soft menu and
the display shows a straight line on the 0dB scale.
5.12
【
Demod
】
Demodulation
Enter the demodulation settings, the spectrum analyzer supports
audio demodulation and AM, FM digital demodulation.
5.12.1 [DEMOD►]
Enter Audio Demod soft menu.
5.12.2 [Demod On Off]
Turn audio demodulation on or off.
5.12.3 [Demod Mode►]
Enter the demodulation mode soft menu. Including FMW, FM, AM,
USB, LSB.
5.12.4 [Sound]
When the audio demodulation is on, adjust the speaker output
volume.
5.12.5 [RadioSet►]
42