Instructions

2
The frequency and magnitude of {, <freq>, <rel_ampl>} in the command [:SENSe]:CORRection:CSET
<n>:DATA <freq>, <rel ampl> {, <freq>, <rel ampl>} can be omitted, or to set one or more pairs of
frequency and amplitude parameters.
Vertical bar |
Vertical bars are used to separate multiple parameter options, one of which must be selected when
sending commands. E.g,
In DISPlay:MENU:STATe OFF | ON | 0 | 1 command, the parameters that can be selected are "OFF", "ON",
"0" or "1".
Square bracket [ ]
The contents of the square bracket (command key) are optional and are executed regardless of whether
they are omitted. E.g
[:SENSe]:CORRection:OFFSet[:MAGNitude]?
The effect of sending the following three commands is the same:
:CORRection:OFFSet?
:CORRection:OFFSet:MAGNitude?
:SENSe:CORRection:OFFSet?
Triangle bracket < >
The parameters in the triangle brackets must be replaced with a valid value. E.g:
:DISPlay:BRIGtness <integer>
:DISPlay:BRIGtness 10
Parameter Type
The commands contain 8 kinds of parameters, different parameters have different setting methods.
(1) arbitrary block
A specified length of arbitrary data, for example,
#6377512xxxxx . . . where
6 indicates that the following 6 digits (377512) specify the length of the data in bytes; xxxxx ...
indicates the data or #0xxxxx...<LF><&EOI>
(2) boolean
Boolean numbers or values, for example,
ON or ≠ 0
OFF or 0
(3) discrete
A list of specific values, for example,
MIN, MAX
(4) NR1 numeric