Instructions

SCPI Command Set
41
Example
:PASSFAIL:LINEL:UP:POIN1:DEL
[:SENSe]:PASSFAIL:LINELimit:UPper:POINt<n>:X
Description
Sets or queries the frequency limit of the specified point in the upper limit line.
Syntax
Query Syntax
[:SENSe]:PASSFAIL:LINELimit:UPper:POINt<n>:X <freq>
[:SENSe]:PASSFAIL:LINELimit:UPper:POINt<n>:X?
Parameter
<n>
<freq>
<NR1> Point number
<NRf> Frequency in Hz.
Return parameter
<NR3>
Hz
Example
:PASSFAIL:LINEL:UP:POIN1:X 9e+8
[:SENSe]:PASSFAIL:LINELimit:UPper:POINt<n>:Y
Description
Sets or queries the amplitude limit of the specified point in the upper limit line.
Syntax
Query Syntax
[:SENSe]:PASSFAIL:LINELimit:UPper:POINt<n>:Y <ampl>
[:SENSe]:PASSFAIL:LINELimit:UPper:POINt<n>:Y?
Parameter
<n>
<ampl>
<NR1> Point number
Amplitude in dBm
Return parameter
<NR3>
dBm
Example
:PASSFAIL:LINEL:UP:POIN1:Y -10
[:SENSe]:PASSFAIL:LINELimit:UPPer:STATe
Description
Turns the upper limit line on/off or queries its state.
Syntax
Query Syntax
[:SENSe]:PASSFAIL:LINELimit:UPPer:STATe {OFF|ON|0|1}
[:SENSe]:PASSFAIL:LINELimit:UPPer:STATe?
Parameter
0
1
OFF
ON
Turns the upper limit line off.
Turns the upper limit line on.
Turns the upper limit line off.
Turns the upper limit line on.
Return parameter
0
1
The upper limit line is off.
The upper limit line is on.
Example
:PASSFAIL:LINEL:UPP:STAT 1
[:SENSe]:PASSFAIL:LINELimit:X:OFFSET
Description
Sets or queries the frequency offset (Shift X) of the upper and lower limit line.