Instructions

SCPI Command Set
40
Example
:PASSFAIL:LINEL:LOW:STAT 1
[:SENSe]:PASSFAIL:LINELimit:MARKer<n>:STATe?
Description
Returns the Pass/Fail judgment of limit line testing.
Query Syntax
[:SENSe]:PASSFAIL:LINELimit:MARKer<n>:STATe?
Parameter
<n>
<NR1> Marker number
Return parameter
0
1
Fail
Pass
Example
:PASSFAIL:LINEL:MARK1:STAT?
returns
1
[:SENSe]:PASSFAIL:LINELimit:STATe
Description
Turns limit line testing of pass/fail measurement function on/off.
Syntax
Query Syntax
[:SENSe]:PASSFAIL:LINELimit:STATe {OFF|ON|0|1}
[:SENSe]:PASSFAIL:LINELimitSTATe?
Parameter
0
1
OFF
ON
Turns limit line testing off.
Turns limit line testing on.
Turns limit line testing off.
Turns limit line testing on.
Return parameter
0
1
Limit line testing is off.
Limit line testing is on.
Example
:PASSFAIL:LINEL:STAT 1
[:SENSe]:PASSFAIL:LINELimit:UPper:CLEar
Description
Clears all points of the upper limit line.
Syntax
[:SENSe]:PASSFAIL:LINELimit:UPper:CLEar
Example
:PASSFAIL:LINEL:UP:CLE
[:SENSe]:PASSFAIL:LINELimit:UPper:POINt<n>:DELete
Description
Deletes the specified point in the upper limit line.
Syntax
[:SENSe]:PASSFAIL:LINELimit:UPper:POINt<n>:DELete
Parameter
<n>
<NR1> Point number