Instructions

SCPI Command Set
39
[:SENSe]:PASSFAIL:LINELimit:LOWer:POINt<n>:DELete
Description
Deletes the specified point in the lower limit line.
Syntax
[:SENSe]:PASSFAIL:LINELimit:LOWer:POINt<n>:DELete
Parameter
<n>
<NR1> Point number
Example
:PASSFAIL:LINEL:LOW:POIN1:DEL
[:SENSe]:PASSFAIL:LINELimit:LOWer:POINt<n>:X
Description
Sets or queries the frequency limit of the specified point in the lower limit line.
Syntax
Query Syntax
[:SENSe]:PASSFAIL:LINELimit:LOWer:POINt<n>:X <freq>
[:SENSe]:PASSFAIL:LINELimit:LOWer:POINt<n>:X?
Parameter
<n>
<freq>
<NR1> Point number
<NRf> Frequency in Hz.
Return parameter
<NR3>
Hz
Example
:PASSFAIL:LINEL:LOW:POIN1:X 2e+8
[:SENSe]:PASSFAIL:LINELimit:LOWer:POINt<n>:Y
Description
Sets or queries the amplitude limit of the specified point in the lower limit line.
Syntax
Query Syntax
[:SENSe]:PASSFAIL:LINELimit:LOWer:POINt<n>:Y <ampl>
[:SENSe]:PASSFAIL:LINELimit:LOWer:POINt<n>:Y?
Parameter
<n>
<ampl>
<NR1> Point number
Amplitude in dBm
Return parameter
<NR3>
dBm
Example
:PASSFAIL:LINEL:LOW:POIN1:Y -20
[:SENSe]:PASSFAIL:LINELimit:LOWer:STATe
Description
Turns the lower limit line on/off or queries its state.
Syntax
Query Syntax
[:SENSe]:PASSFAIL:LINELimit:LOWer:STATe {OFF|ON|0|1}
[:SENSe]:PASSFAIL:LINELimit:LOWer:STATe?
Parameter
0
1
OFF
ON
Turns the lower limit line off.
Turns the lower limit line on.
Turns the lower limit line off.
Turns the lower limit line on.
Return parameter
0
1
The lower limit line is off.
The lower limit line is on.