Instructions

SCPI Command Set
38
[:SENSe]:FREQuency:STARt
Description
Sets or queries the start frequency.
Syntax
Query Syntax
[:SENSe]:FREQuency:STARt <freq>
[:SENSe]:FREQuency:STARt?
Parameter
<freq>
<NRf>
Return parameter
<NR3>
Hz
Example
:FREQ:STAR 0
[:SENSe]:FREQuency:STOP
Description
Sets or queries the stop frequency.
Syntax
Query Syntax
[:SENSe]:FREQuency:STOP <freq>
[:SENSe]:FREQuency:STOP?
Parameter
<freq>
<NRf>
Return parameter
<NR3>
Hz
Example
:FREQ:STOP 1.0e+6
[:SENSe]:OBWidth:PERCent
Description
Sets or queries the percentage of signal power used when determining the
occupied bandwidth (OBW).
Syntax
Query Syntax
[:SENSe]:OBWidth:PERCent <percent>
[:SENSe]:OBWidth:PERCent?
Parameter
<percent>
<NRf>
Return parameter
<NR3>
Example
:OBW:PERC 33
[:SENSe]:PASSFAIL:LINELimit:LOWer:CLEar
Description
Clears all points of the lower limit line.
Syntax
[:SENSe]:PASSFAIL:LINELimit:LOWer:CLEar
Example
:PASSFAIL:LINEL:LOW:CLE