Instructions

SCPI Command Set
32
[:SENSe]:BANDwidth:EMC
Description
Sets the EMI filter bandwidth (must be set to the exact bandwidth).
Syntax
Query Syntax
[:SENSe]:BANDwidth:EMC <freq>
[:SENSe]:BANDwidth:EMC?
Parameter
<freq>
<NRf>
(Only 200Hz, 9kHz, 120kHz, 1MHz are valid settings)
Return parameter
<NR3>
Example
BAND:EMC 200
[:SENSe]:BANDwidth:EMC:STATe
Description
Turns the EMI filter on/off or queries its state.
Syntax
Query Syntax
[:SENSe]:BANDwidth:EMC:STATe {OFF|ON|0|1}
[:SENSe]:BANDwidth:EMC:STATe?
Parameter
0
1
OFF
ON
Turns the EMI filter off.
Turns the EMI filter on.
Turns the EMI filter off.
Turns the EMI filter on.
Return parameter
0
1
The EMI filter is off.
The EMI filter is on.
Example
BAND:EMC:STAT 0
[:SENSe]:DEMod:AM[:CARRier]:FREQuency
Description
Sets or queries the carrier frequency for AM demodulation.
Syntax
Query Syntax
[:SENSe]:DEMod:AM[:CARRier]:FREQuency <freq>
[:SENSe]:DEMod:AM[:CARRier]:FREQuency?
Parameter
<freq>
<NRf>
Return parameter
<NR3>
Hz
Example
:DEM:AM:FREQ 10 mhz
[:SENSe]:DEMod:AM:IFBW
Description
Sets or queries the IF bandwidth for AM demodulation.
Syntax
Query Syntax
[:SENSe]:DEMod:AM:IFBW <freq>
[:SENSe]:DEMod:AM:IFBW?
Parameter
<freq>
<NRf>