Instructions

SCPI Command Set
24
INITiate Commands
:INITiate:CONTinuous
Description
Sets the sweep mode to continuous or single mode or queries its state.
Syntax
Query Syntax
:INITiate:CONTinuous {OFF|ON|0|1}
:INITiate:CONTinuous?
Parameter
0
1
OFF
ON
Sets the sweep mode to single.
Sets the sweep mode to continuous.
Sets the sweep mode to single.
Sets the sweep mode to continuous.
Return parameter
0
1
The sweep mode is single.
The sweep mode is continuous.
Example
:INIT:CONT ON