Instructions

SCPI Command Set
16
CONFigure Commands
:CONFigure:ACPower
Description
This command places the analyzer in Adjacent Channel Power measurement
state.
Syntax
:CONFigure:ACPower
Example
:CONF:ACP
:CONFigure:CHPower
Description
This command places the analyzer in Channel Power measurement state.
Syntax
:CONFigure:CHPower
Example
:CONF:CHP
:CONFigure:OBWidth
Description
This command places the analyzer in Occupied Bandwidth measurement state.
Syntax
:CONFigure:OBWidth
Example
:CONF:OBW
:CONFigure:SANalyzer
Description
Directly exit the currently running measurement function.
Syntax
:CONFigure:SANalyzer
Example
:CONF:SAN
:CONFigure:SATime
Description
Turns on or off time spectrum measure mode.
Syntax
:CONFigure:SATime
Example
:CONF:SAT