Instructions

SCPI Command Set
11
:CALCulate:MARKer<n>[:SET]:STOP
Description
Sets the stop frequency to the value of the specified marker frequency. In delta
marker mode, the stop frequency is set to the delta marker frequency. This
command is not available in zero span.
Syntax
:CALCulate:MARKer<n>[:SET]:STOP
Parameter
<n>
<NR1> Marker number 1 to 5
Example
:CALC:MARK1:STOP
:CALCulate:MARKer<n>:STATe
Description
Sets or queries the state of the selected marker.
Syntax
Query Syntax
:CALCulate:MARKer<n>:STATe {OFF|ON|0|1}
:CALCulate:MARKer<n>:STATe?
Parameter
<n>
0
1
OFF
ON
<NR1> Marker number 1 to 5.
Turns the selected marker off.
Turns the selected marker on.
Turns the selected marker off.
Turns the selected marker on.
Return parameter
0
1
The selected marker is off.
The selected marker is on.
Example
:CALC:MARK1:STAT ON
:CALCulate:MARKer:TABLe:STATe
Description
Sets or queries the state of the marker table.
Syntax
Query Syntax
:CALCulate:MARKer:TABLe:STATe {OFF|ON|0|1}
:CALCulate:MARKer:TABLe:STATe?
Parameter
0
1
OFF
ON
Turns the table off.
Turns the table on.
Turns the table off.
Turns the table on.
Return parameter
0
1
The table is off.
The table is on.
Example
:CALC:MARK:TABL:STAT ON